枣庄电梯套厂家现在要和大家同享的是石塑线条厂家同享保护小常识dtmtx1689
Zaozhuang elevator manufacturer now wants to share with you the common sense of protection of stone and plastic manufacturers.

石塑线条厂家温馨提示：做抛光处理注意次序，是从里至外、从左至右的全面抛光，会全面抛光。

Stone and plastic factory manufacturers warm tips: do polishing processing attention order, is from inside to outside, from left to right comprehensive polishing, will be fully polished.

由于石塑线条存在细微孔，在选用蜡水时，要运用没有添加色料的蜡水，防止污染的情况出现。

Due to the existence of fine pores in stone and plastic lines, wax water should be used to prevent contamination when wax water is used.

打蜡时间应该适合，既不要太长，也不要太短。太长简略使石塑线条氧化，太短呢起不到保护的作用。
The waxing time should be suitable, neither too long nor too short. Too long to make stone plastic line oxidation, too short can not play the role of protection.

一同也要协作保护剂，这样在石塑线条表面构成保护膜，有用的保护石塑线条不受污染，也可以延伸其运用寿数。

It is also necessary to cooperate with the protection agent, so as to form a protective film on the surface of the stone plastic line, the useful protection of the stone plastic line is not polluted, and it can also extend its life.