电梯门套是不锈钢门套中最常用的一款，电梯门套与其它门套不同的是，因其使用在公共场合，尤其是店，会所，商场等休闲场所的乘客电梯，更注重美观、时尚。那么我们该如何选择电梯门套呢?
The elevator door is the most commonly used stainless steel door in an elevator door, unlike other door, because of its use in public places, especially restaurants, clubs, shopping malls and other places of leisure passenger elevator, pay more attention to beauty and fashion. So how do we choose the elevator door?

一、选择不锈钢电梯门套相应的款式
First, choose the appropriate style of stainless steel elevator door
常见的电梯门套主要有两种款式，一种是竖边与横边90度拼角，这样看起来线条很直，现场拼接非常方便，这也是常用的一款;另一款是横边与竖边45度拼角，这样拼出来的门套形成一个整体，没有转折处，因此整个门套看起整体如一。
The elevator door has two main common styles, one is the vertical edges and the 90 degree angle seems very spell, straight lines, field stitching is very convenient, it is also a common; another is the transverse edge and vertical 45 degree angle spell spell, so the door to form a whole no, the turning point, so the door looks as a whole.
二、选择相应的材质
Two, select the appropriate material
电梯门套常用的材质主要是201和304，201强度比304强度要高，因此不容易变形，304材质含耐腐蚀的镍元素要高，因此更耐腐蚀。两种材质的成本也不一样，201成本要比304成本要低。然后电梯门套的厚度，一般常选0.8~1.5厚的不锈钢板材.通常压圆弧的选0.8至1.0厚的不锈钢板压出形状更精确,压5mm左右的小尺寸拆角，选用较薄的板更精确，而且不容易压爆。
The material used is 201 and the 304201 elevator door is higher than the 304 strength, it is not easy to deformation, 304 nickel corrosion resistant material with high corrosion resistance, so the more. The cost of the two materials is different, 201 cost is lower than 304 cost. Then lift the thickness of the door, usually choose 0.8~1.5 thick stainless steel plate. The arc pressure usually choose 0.8 to 1 thick stainless steel plate extrusion shape is more accurate, the small size of 5mm open angle, select thinner plate is more accurate, but not easy to burst.
三、选择相应的表面效果
Three, select the corresponding surface effect
电梯门套表面主要有以下几种装饰效果：镜面钛金、原色、蚀刻钛金。原色门套是采用不锈钢拉丝面或镜面做门套，然后看起来简单，成本也较低。蚀刻钛金电梯门套是在门套表面上蚀刻一些线条、花纹和图案，主要用来突出现场的效果。
There are several main elevator door decoration effect: mirror surface color, titanium, titanium etching. Color door is made of stainless steel wire drawing or mirror and then do Mentao, looks simple, the cost is relatively low. The elevator door is in the etching of titanium on the surface of etched lines, Mentao patterns and designs, mainly to highlight the effect of the scene.
希望上述介绍对您有所帮助哦,我们以真诚贴近客户,以行动满足客户,以双赢保有客户,以个性引领客户,您的满意是我们最大的追求。
Hope that the above introduction of your help Oh, we are sincere to customers, to action to meet customers, to win-win customer retention, personality to lead customers, your satisfaction is our greatest pursuit.