仿大理石uv板正确的施工方法是：
The correct construction method of imitation marble UV plate is:
一、结构胶粘贴法：
Structure adhesive paste method:
1、墙面预处理：先刮干净墙面的腻子粉，去处墙面的粉尘颗粒，保证后期结构胶的有效粘贴。
1, metope pretreatment: first clean the wall putty powder, place the wall dust particles, guarantee the later structure glue effective paste.
2、墙面填平：将墙面中有凹陷处填入发泡胶，使之处于一个平面，如果墙面是异形或者没办法平整，可以直接打上复合板或者三合板。
2, the wall filled with depression: the walls in styrofoam, which is in a plane, if the wall is shaped or not smooth, can be directly hit the composite plate or three ply.

3、结构胶点沾：按照规格裁剪好仿大理石UV装饰板材，用结构胶均匀涂抹在板材的背面。
3, structural adhesive point: in accordance with specifications to cut good imitation marble UV decorative sheet, with structural adhesive evenly coated on the back of the plate.
4、安装：按照装修风格将涂抹好结构胶的板材按压在墙面上。并保证受力均匀、持续。
4, installation: in accordance with the decoration style, will be coated with structural adhesive board pressed on the wall. And ensure uniform and sustained force.
二、铝合金固定：
Two 、 aluminum alloy fixation:
1、墙面基层：先在墙面打上一面基层，三合板或者木工板都行，好点是防火玻镁板，用气盯把它们钉在墙面上。
1, metope base: first on the wall to play a grass-roots, three plywood or carpentry board will do, the good point is fire-resistant glass magnesium plate, with gas stare, nail them on the wall.
2、阴阳角装饰线条的安装：先在墙面上钉上脚线，用铝合金阴角固定在墙角，再用铝合金工具条固定墙角，也就是分别把铝合金阴角和铝合金工具条分别用钉子钉在墙面的相应位置。
2, yin and yang angle decorative line installation: first in the wall nail on the foot line, with Aluminum Alloy Yin angle is fixed in the corner, and then Aluminum Alloy tool fixed corner, is the Aluminum Alloy Yin angle and Aluminum Alloy tools were used in the corresponding position of the wall of the nail.
3、裁剪板材：按照规格裁锯仿大理石UV装饰板材，将UV板按实际要求尺寸锯成规定尺寸，再将锯边用砂纸修整平整和干净。
3, cutting plate: in accordance with specifications cut saw, imitation marble UV decorative sheet, the UV board according to the actual requirements size sawing into the specified size, and then saw edge with sandpaper trim, smooth and clean.
4、再将UV板嵌入铝合金阴角和工具条之间就行了。
4, then insert the UV board between the aluminum alloy, the negative angle and the tool bar.
5、如果为了更牢固也可以现在装饰板材背面涂上结构胶在嵌入铝合金阴角就行。
5, if in order to be more solid, you can now decorate the back of the plate coated with structural adhesive, embedded in the aluminum alloy Yin Kok on the line.
您如果对我们的产品感兴趣或者有任何的疑问，您可以直接给我们留言或直接与我们联络，我们将在收到您的信息后，会第一时间及时与您联络。
If you are interested in our products or have any questions, you can either leave us a message or contact us directly. We will contact you in the first time after receiving your information.