全国服务热线:

15853163650
您当前的位置:首页 > 新闻动态 > 行业新闻
    联系我们

    CONTACTS US

    地址:山东济南历城区华龙路嘉恒大厦A座1201室

    邮箱:hhjc168@126.com

    公司传真: 0531-88518398

    电话:15853163650

行业新闻

COMPANY NEWS

电梯门套做法的要点

2016-09-01 11:05:00 文章来源:www.jnhaohui.com

电梯门套做法的要点,你知道几点:
Elevator door points approach, you know a few:
1、物料准备:线条、泡棉胶、硅酮胶、切割锯、胶枪、红外线仪器。电梯门套
1, the preparation of materials: line, foam rubber, silicone rubber, cutting saw, glue gun, infrared instrument.
2、结构墙体基面清理干净表面没有油污、浮尘、并检验墙面平整度和垂直度。超差部分应剔凿或用水泥砂浆修补缺陷,加固找平,方能施工。
2, the structure of wall surface cleaning up clean surface, no oil, dust, and test the metope flatness and verticality. Outoftolerance part should chisel or cement mortar repair defects, reinforcement leveling, Party construction.
3、在墙面找出水平线、垂直控制线。
3, in the wall to find the horizontal line, vertical control line.
4、切割锯采用45度角对线条切割并对角拼接检查平整度。
4, cutting saw using 45 degree angle on the line cutting and diagonal stitching inspection smoothness.
5、线条背面点粘硅酮胶。
5, line back sticky silicone rubber.
6、将线条安装到位,压实。
6, the line is installed in place, compaction.
7、将对角处缝隙打玻璃胶填满抹平。
7, the gap between the diagonal a plastic glass filled out.
8、将线条与墙的间隙打胶抹平电梯门套施工方案。
8, clearance lines and wall construction scheme of elevator door smooth play glue.
创造优良的产品,是我们的一惯追求,长期以来公司以高质量的产品和优良的服务赢得了国内外客户的信任。
To create a good product, is our one used to pursue, the company for a long time to high quality products and excellent service to win the trust of customers at home and abroad.