现在的建筑里面，在建设的时候都会设计上电梯。这个时候就会需要用到电梯门套，电梯门套的种类也是有很多种的，一般都是根据整体的设计去选择选用什么样子的，以及什么材质的电梯门套的，下面小编为您介绍一下电梯门套施工方案大全。
Now the building inside, at the time of the building will be designed on the elevator. This time you will need to use the elevator door, kinds of elevator door is many, usually according to the overall design to choose choose what it looks like, and what material the elevator door, the following Xiaobian for you to introduce the elevator door construction program Daquan.
一、石材表面处理，石材表面应干燥，含水不大于8%。
One, stone surface treatment, stone surface should be dry, water is not more than 8%.
二、石材安装前先对石材进行挑选、使用一个门套石材色泽、花纹一致、挑出色差。
Two, before installation of stone stone selection, use a stone door colors and patterns, pick out the color.
三、对安装石材的结构表面清理，放水平线、垂直线。
Three, the installation of the structure of the stone surface cleaning, put the horizontal line, vertical line.
四、用台钻打眼、每块板上、下面打眼，孔位打在板中间，孔径为8mm，深度为12mm。
Four, with a bench drill, each plate, drill holes in the below, the middle of the board, aperture of 8mm, depth of 12mm.
五、用膨胀螺栓把角架固定，再把挂件固定在角架上。
Five, with the expansion bolt to fix the angle, and then the hanging fixed on the corner.
六、石材开槽，用大理石胶把石材固定在挂件上。
Six, stone slot, with marble glue stone fixed on the hanging.
七、立面垂直，光面平整，接缝平直，接缝宽度，偏差允许2mm。
Seven, vertical, smooth smooth, straight seam, seam width, allowable deviation of 2mm.
八、全部安装完后，要对表面石材一次性清理。
Eight, after all the installation, to the surface of the stone one-time cleaning.
相信看了上面的介绍，您定会心动，要了解更多的电梯门套内容，欢迎您进店或电话咨询更多信息，期待您的到来。
Believe that read the above, you will be enchanted, to understand the more contents of elevator door, welcome you into the store or telephone consultation more information, look forward to your arrival.