UV装饰板是目前市场上最新型的环保装饰材料，不仅环保健康，且装饰效果好，表面采用UV光固化漆保护处理，耐磨，耐划痕，耐污染腐蚀，抗热耐冷，颇受消费者喜爱。限免给大家介绍UV装饰板的安装方法。
UV decorative board is currently on the market the new type of environmentally friendly decorative materials, not only environmental health, and good decorative effect, the surface of the UV light curing paint protection, abrasion resistance, scratch resistant, anti fouling corrosion, thermal resistance to cold, popular. Limited to everyone to introduce the installation method of UV decorative board.

一、用墙面胶安装
First, use wall glue installation
1、在墙面上覆上一面基层，常用的是3MM的三合板，木工板，好点是防火玻镁板。用气钉把它们钉在墙面上，并用沙纸将板面清洁干净。
1, on the wall covered with a base, commonly used is 3MM three plywood, carpentry board, the good point is fireproof glass magnesium board. Gas nail nail them on the wall, and the clean surface with sandpaper.
2、锯板，将UV装饰板按实际要求锯成一块块的。
2, saw plate, UV decorative board according to the actual requirements saw a block.
3、倒边，将要安装的UV板四边用倒边机倒成45度角。根据实际安装要求，有的只需倒上下两边或是三个边。
3, inverted side, the UV board will be installed with four sides of the inverted side machine into 45 degrees angle. According to the actual installation requirements, some only need to top or lower sides or three sides.
4、清洁UV板背面，用沙纸和抹布将UV板背面清洁干净。
4, clean the UV plate with sandpaper and back cloth to clean the board back UV.
5、把万能胶或木工胶均匀涂在UV装饰板背面，然后将UV装饰板平整地贴在墙面上，再用手轻轻锤打UV装饰板，让UV装饰板更加牢固粘在墙面上。
5, the adhesive or wood glue evenly coated on the back of the decorative plate UV, and then UV decorative board smoothly on the wall, then gently hammering UV decorative board, let UV decorative board more firmly stick on the wall.
6、调水性填缝料，然后将填缝料填在两张UV装饰板45度角相交处，先填满，再用木板垂直角从45度角相交处轻轻划过，这样相交处就美观了。
6, adjust the water filling material, and then fill the filling material in two UV decorative board 45 degrees angle intersection, first fill, and then wood vertical angle from 45 degrees angle intersection lightly rowed, so that intersection is beautiful.
7、清洁UV装饰板表面，将多余的填缝料清洁干净。
7. Clean the surface of UV decorative board, clean the excess caulking material.
二、铝合金固定
Two. Aluminum alloy fixation
1、在墙面上覆上一面基层，常用的是3MM的三合板，木工板，好点是防火玻镁板，用气钉把它们钉在墙面上。
1, on the wall covered with a base, commonly used is 3MM three plywood, carpentry board, the good point is fireproof glass magnesium plate, with air nail to nail them on the wall.
2、在墙面上钉脚线。用铝合金阴角固定墙角、再用铝合金工具条固定墙角。也就是分别把铝合金阴角和铝合金工具条分别用钉子钉在墙面的相应位置。
2, nailing the foot line on the wall surface. Fix the corner with the aluminum alloy negative angle, and then fix the corner with the aluminum alloy tool bar. That is to say, the aluminum alloy negative angle and aluminum alloy tool bar are respectively nailed in the corresponding position of the wall.
3、再就是锯UV装饰板。将UV板按实际要求尺寸锯成一块一块的，再将锯边用沙纸修整平整和干净。
3, and then saw UV decorative board. The UV board according to the actual requirements of the size of sawing a piece, then sawing with sandpaper smooth and clean dressing.
4、再将UV装饰板嵌入铝合金阴角和工具条之间就行了。
4, and then UV decorative plate embedded in aluminum alloy Yin angle and tool bar between the line.
我们以优良的产品，完美的服务，可靠的信誉，为您的事业成功助一臂之力，竭诚欢迎各界同仁惠顾洽谈业务！
We have a good product, perfect service, reliable reputation, to help your career success, and sincerely welcome all walks of life Tongren negotiate business!