1、电梯套线条选材：挑选设计好规格和花色的线条，一般常用的有仿大理石电梯套线条和高分子PVC线条，这两种在硬度和抗性上会有所区别，可以自由挑选。

1, elevator line selection: select the design of good specifications and color lines, commonly used to imitate marble elevator lines and polymer PVC lines, these two in the hardness and resistance will be different, can be freely selected.

2、电梯套线条侧板的挑选：选择完线条之后在选择与门套线条配套的调节板来搭配使用，花纹可以和线条的相同，也可以自由搭配。

2, the selection of the side plate of the elevator line: after choosing the line, it can be used with the adjustment board matching the line with the line. The pattern can be the same as the line, and it can also be collocated freely.

3、切割：一般买来的线条和调节板都是厂家生产的主流尺寸，根据自己的实地尺寸先进行切割、剪裁

3, cut: generally bought lines and adjusting boards are the mainstream sizes produced by manufacturers, cutting and tailoring first according to their field size.

4、墙面预处理：将墙面进行清洁处理，清理干净情面的毛刺、浮沉，有坑洼的地方要使用发泡胶填平

4, wall pretreatment: clean the walls, clean up the burr, float and sink, and use the foam to fill the potholes.

5、结构胶点沾：在切割好的线条和调节板的背面使用结构胶均匀点沾，为保证牢固度可以多点结构胶。

5, structural adhesive point: in the cutting line and the back of the adjusting board, use structural glue to evenly touch the spots. In order to ensure firmness, you can have more structural adhesive.

6、安装：按照设计好的位置，将涂好结构胶的电梯门套线按压在上面，拼接好形状，保证受力均匀。

6, installation: according to the designed location, the door of the elevator door coated with structural adhesive is pressed on the top, and the shape is spliced to ensure uniform force.

7、清洁：电梯套线条安装完成之后，用中性清洁剂来清洁整个电梯套线条。

7. Cleanliness: after installing the elevator line, clean the whole elevator line with neutral detergent.