全国服务热线:

15853163650
您当前的位置:首页 > 新闻动态 > 行业新闻
    联系我们

    CONTACTS US

    地址:山东济南历城区华龙路嘉恒大厦A座1201室

    邮箱:hhjc168@126.com

    公司传真: 0531-88518398

    电话:15853163650

行业新闻

COMPANY NEWS

石塑电梯门套的安装三部曲

2018-05-26 10:06:36 文章来源:www.jnhaohui.com

电梯门套不管是在居民楼还是商业写字楼都可以用到,因此电梯门的安装也显得格外重要了。为什么呢?因为它需要安装结实牢固,也要美观,上档次。

The elevator door can be used either in residential buildings or in commercial office buildings, so the installation of elevator doors is particularly important. Why? Because it needs to be sturdy, firm and elegant.


那么电梯门套的安装步骤是什么呢?怎么安装比较好呢!下面电梯门套厂家济南皓晖小编就给大家分享一下。

So what is the installation step of the elevator door cover? How to install it better! The next elevator door manufacturer Ji'nan Hao Hui Xiaobian to share with you.

 电梯门套

第一、先把石塑电梯门套的各个部位及零件检查好,看是否有遗漏,顶套线,左右门框线;门挡线;云石胶,其他专用工具等等,要确保所有部件都整齐。

First, check all parts and parts of the stone plastic elevator door first. See if there is omission, top sleeve line, left and right door frame line, door block line, mica glue, other special tools, etc., to ensure that all parts are neat.


第二、检查完毕后,组装顶框和侧框。在侧框的一端会有加工好的固定用台阶。两条侧框与顶框45度角对齐接合后,用专用的云石胶粘贴好,固定。

Second. After inspection, assemble the top frame and side frame. At the end of the side frame, there will be a fixed step. The two side frames are aligned with the top frame at 45 degree angles, and then pasted and fixed with special marble paste.


第三、左右条侧框固定好后,在电梯门套的下方用一块小木方进行校正,对齐即可。

Third. When the left and right side frames are fixed, use a small wooden square to correct the bottom of the elevator door.