新闻中心
NEWS CENTER
联系我们
CONTACTS US
济南皓晖建材有限公司，总部位于中国泉城——山东济南，是一家专业生产销售石塑电梯门套，仿大理石电梯门套的专业厂家。皓晖建材在电梯门套生产行业很多年，凭着优质的产品质量和完善的售后服务，在全国各地都有我们的工程案例。
我们本着“以质量求生存 ，靠管理出效益，凭信誉赢口碑,以实干筑辉煌”的经营理念，公司将立足于当代建材现代化发展前沿，依靠科技、勇于探索，以优质产品优良服务、信誉与广大用户携手共创辉煌。
联系电话： 15853163650
工厂地址：山东济南章丘区（欢迎广大客户来厂勘察）
公司动态
COMPANY NEWS
清洁石塑UV板表面的流程有哪些？
2016-04-14 15:18:27 文章来源：www.jnhaohui.com
1用漏斗将喷雾瓶装满蒸馏水。
1 use the funnel to fill the spray bottle with distilled water.
2蒸馏水轻轻喷洒在石塑UV板表面。
2 distilled water is lightly sprayed on the surface of the stone plastic UV board.
3上一层厚厚的太白粉到石塑UV板表面。
3 on a thick layer of white powder into the stone plastic UV board surface.
5一块干净的软布擦去太白粉扫进一个垃圾袋。
5 a clean, soft cloth to wipe off the white powder into a garbage bag.
6果污渍仍残留在石塑UV板表面，请重复步骤2到5。
6 fruit stains still remain in the stone plastic UV plate surface, please repeat steps 2 to 5.
71茶匙的温和的洗碗肥皂和温水在一个小碗里混合。
71 teaspoon mild dishwashing soap and warm water in a small bowl mix.
8一块软布浸在肥皂温水里。拧出多余的水分。
8 a soft cloth dipped in warm soapy water. Screw out the excess water.
9用湿布擦拭石塑UV板表面，彻底清除去太白粉和油脂残留。
9 use wet cloth to wipe the stone plastic surface of the UV board, to completely remove the cornstarch and oil residue.
10布将石塑UV板表面擦干。
10 cloth will be stone plastic UV board surface dry.
本文由仿大理石线条提供帮助，更多的相关内容请点击：http://www.jnhaohui.com我们将详情为您解答.欢迎您的光临!
This article from the imitation marble lines to provide help, more relevant content please click: http://www.jnhaohui.com we will be the details for you to answer!
1 use the funnel to fill the spray bottle with distilled water.
2蒸馏水轻轻喷洒在石塑UV板表面。
2 distilled water is lightly sprayed on the surface of the stone plastic UV board.
3上一层厚厚的太白粉到石塑UV板表面。
3 on a thick layer of white powder into the stone plastic UV board surface.
4太白粉停留24个小时。
5一块干净的软布擦去太白粉扫进一个垃圾袋。
5 a clean, soft cloth to wipe off the white powder into a garbage bag.
6果污渍仍残留在石塑UV板表面，请重复步骤2到5。
6 fruit stains still remain in the stone plastic UV plate surface, please repeat steps 2 to 5.
71茶匙的温和的洗碗肥皂和温水在一个小碗里混合。
71 teaspoon mild dishwashing soap and warm water in a small bowl mix.
8一块软布浸在肥皂温水里。拧出多余的水分。
8 a soft cloth dipped in warm soapy water. Screw out the excess water.
9用湿布擦拭石塑UV板表面，彻底清除去太白粉和油脂残留。
9 use wet cloth to wipe the stone plastic surface of the UV board, to completely remove the cornstarch and oil residue.
10布将石塑UV板表面擦干。
10 cloth will be stone plastic UV board surface dry.
本文由仿大理石线条提供帮助，更多的相关内容请点击：http://www.jnhaohui.com我们将详情为您解答.欢迎您的光临!
This article from the imitation marble lines to provide help, more relevant content please click: http://www.jnhaohui.com we will be the details for you to answer!
上一篇：电梯门套线白华预防的方式
下一篇：仿大理石uv板的未来发展
