仿大理石uv板安装记住这四个顺序：先顶后墙，先板后线，自下而上，从外往里。

Like marble UV board installation, remember these four orders: first, the top and back walls, the first plate and the back line, from bottom to top, from outside to inside.

顶后墙是指先安装吊顶再安装墙板。安装吊顶时需要先固定好龙骨；在墙板安装第一块仿大理石uv板需先用钢钉固定在墙板上，以后每安装一块一边扣在前一块仿大理石uv板上，另一边用在打钉边上固定。安装时要注意整体的画面设计，需先分格弹线，根据预先设计好的图纸安装。如遇到插座位置，需要预先留好插座口。

The top wall is the first installation of the ceiling and then the wall plate. When installing the ceiling, we need to fix the keel first; the first piece of marble UV board in the wall board should be fixed on the wall plate first with the steel nail, and then one piece is fastened on the front of the previous imitation marble UV board, and the other is fixed on the side of the nail. When installing, attention should be paid to the overall picture design, which needs to be divided into lattice shells and installed according to the pre designed drawings. If there is a socket outlet, you need to reserve a socket outlet in advance.

先板后线是指先安装主要的板材，再安装线条，先大面积安装，再处理转角、收边等细节。如果遇到立柱，可采用背面开槽的方法将立柱包住。

The first line is to install the main plate first, then install the line, then install it in a large area, then handle the details such as corner and edge. If a column is encountered, the column can be wrapped by the method of slotting on the back.

自下而上是指安装墙板时，需要先从墙底开始安装，逐渐往上增加，直到安装完整个墙板。

From bottom to top, when installing wall panels, it is necessary to install them from the bottom of the wall first, and then increase gradually until the complete wall panels are installed.

从外往里是指从房间进门的墙板开始往里的顺序安装，这是因为安装到最后部分需要切割，从外往里安装更加的美观。

From the outside, the wall board from the room starts to start in the order of the inside, this is because the final part of the installation needs to be cut, from the outside to install more beautiful.

整体上来说，集成墙顶安装非常便捷，直接安装在毛坯墙板，两个木工师傅即可完成。如果墙板不平，则需要在安装前找平墙板。

On the whole, the installation of the integrated wall top is very convenient, it is directly installed on the blank wall panels, and two woodworking masters can complete. If the wall is uneven, the wall panel must be leveled before installation.