新闻中心
NEWS CENTER
联系我们
CONTACTS US
济南皓晖建材有限公司,总部位于中国泉城——山东济南,是一家专业生产销售石塑电梯门套,仿大理石电梯门套的专业厂家。皓晖建材在电梯门套生产行业很多年,凭着优质的产品质量和完善的售后服务,在全国各地都有我们的工程案例。
我们本着“以质量求生存 ,靠管理出效益,凭信誉赢口碑,以实干筑辉煌”的经营理念,公司将立足于当代建材现代化发展前沿,依靠科技、勇于探索,以优质产品优良服务、信誉与广大用户携手共创辉煌。
联系电话: 15853163650
工厂地址:山东济南章丘区(欢迎广大客户来厂勘察)
行业新闻
COMPANY NEWS
电梯套线条大阳角的解决方法
2018-05-30 10:28:09 文章来源:www.jnhaohui.com
倘若宽度达到一厘米以上,叫做“大阳角”。大阳角的补胶方法,和小阳角差不多。
If the width is above one centimeter, it is called "big Yang angle". The filling method of Dayang Jiao is almost the same as Xiao Yang Jiao.
上篇文章已经提到,为了节约时间,在此就不说了。由于大阳角的宽度大,就会有光泽度的情况。一般会有两种情况:
The last article has mentioned that in order to save time, we will not mention it here. Because the width of the big Yang angle is large, there will be glossiness. In general, there are two cases:

第一是电梯套线条厂家出库时已经把此处做过抛光,要是把多余的胶用刀片处理后,倘若残留有胶的痕迹,通常是涂上少量VD石材除油除胶剂,用钢丝棉擦干净就行。
The first is that the elevator line manufacturers have done the polishing when they are out of the library. If the excess glue is treated with the blade, if there is a trace of the residual glue, it is usually coated with a small amount of VD stone to remove the oil and remove the glue and wipe clean with the steel wire.
第二是电梯套线条厂家出库时没做抛光,需要使用手提抛光机和干磨片,磨个五六次即可,最后再用海绵抛收光。这里不需要做出晶面的品质,只需要做出柔润、有光泽度的效果即可。
Second is the elevator line manufacturers do not polish the outlet, need to use hand-held polishing machine and dry grind, grinding five or six times, and then sponge to throw light. There is no need to make the crystal surface quality, only need to make soft and glossy effect.
上一篇:电梯套线条小阳角的解决方法
下一篇: 电视背景石塑集成墙板的布置