不锈钢电梯门套是不锈钢门套中最常用的一款，电梯门套与其它门套不同的是，因其使用在公共场合，那么我们该如何选择电梯门套呢？
Stainless steel elevator door cover is one of the most commonly used in stainless steel door, the elevator door cover and the other door cover, because of its use in public, so how do we choose the elevator door cover?
一、选择不锈钢电梯门套相应的款式
Choose stainless steel elevator door set corresponding style
常见的电梯门套主要有两种款式，一种是竖边与横边90度拼角，这样看起来线条很直，现场拼接非常方便，这也是常用的一款；另一款是横边与竖边45度拼角，这样拼出来的门套形成一个整体，没有转折处，因此整个门套看起整体如一。两种款式各有其优点，90度拼接安捉便、成本较低。45度好看，但是拼接吻合度不高，而且还需闲割，因此成本要高于90度拼接。通常向客户推荐采用90度拼接，更经济。
There are two main types of common elevator door cover design, one is vertical and horizontal while 90 degree Angle, it looks very straight line, the stitching is very convenient, it is a commonly used; The other is the horizontal side and the vertical side 45 degrees of the corner, so the door set that puts out to form a whole, there is no turning point, so the whole door set looks like the whole. Each style has its advantages, the 90 degree splicing and capturing, the cost is lower. The 45 degree is good-looking, but the splicing is not high, and it needs to be cut, so the cost is more than 90 degree splicing. It is usually recommended to use 90 degree stitching and more economical.
二、选择相应的材质
Two, choose the material that corresponds

电梯门套常用的材质主要是201和304，201强度比304强度要高，因此不容易变形，304材质含耐腐蚀的镍元素要高，因此更耐腐蚀。两种材质的成本也不一样，201成本要比304成本要低。然后电梯门套的厚度，一般常选0.8~1.5厚的不锈钢板材.通常压圆弧的选0.8至1.0厚的不锈钢板压出形状更精确,压5mm左右的小尺寸拆角，选用较薄的板更精确，而且不容易压爆。

The main materials used in elevator door covers are 201 and 304, 201, which is higher than 304 strength, so it is not easy to distort, and the 304 materials contain corrosion-resistant nickel elements and therefore more corrosion resistant. The cost of the two materials is different, and the cost of 201 is lower than the 304 cost. Then the elevator door cover thickness, average often choose 0.8 ~ 1.5 thick stainless steel plate. Usually arc pressure of 0.8 to 1.0 thick stainless steel plate out of shape to be more accurate, about 5 mm pressure Angle of small size, choose thinner plate to be more accurate, and it is not easy to crush.
三、选择相应的表面效果
Third, select the corresponding surface effect
电梯门套表面主要有三种装饰效果：镜面钛金、原色、蚀刻钛金。镜面钛金是目前客户订购最多的一款，其表面可加工成各种不同的彩色不锈钢钛金颜色，如：玫瑰金、黑钛、灰钛、宝石蓝、黄钛金、古铜、香槟金等，同时彩色不锈钢板表面通过精磨8K的工艺，各制作成稿和反光的镜面板面，表面光滑如镜，因此镜面钛金门套不仅反光效果好，而且耐看。
There are three kinds of decorative effects on the surface of elevator door covers: mirror titanium, original color, etching titanium. Mirror titanium is currently the customer order at most one, its surface can be processed into a variety of different color stainless steel titanium color, such as: rose gold, black titanium, titanium gray, sapphire blue, yellow, titanium gold, bronze, champagne, etc., at the same time, color stainless steel plate surface by fine grinding of 8 k, each into a draft and reflective mirror surface, the surface is smooth as a mirror, so mirror titanium door cover reflective effect is good, not only and able to bear or endure look.
创造优良的产品,是我们的一惯追求,长期以来公司以高质量的产品和优良的服务赢得了国内外客户的信任。
Creating excellent products is our customary pursuit, the company has won the trust of domestic and foreign customers with high quality products and excellent service.